Light Kits for Mini-Z
GPM (#MOL703W) Light Set for Mini-z Overland

powered by either battery end or motor source.
Power Circuit: 4V-7V
Front Light = white;
Back Light = Red;
Yeah Racing (#YE0016W) SuperBright(3200mcd) MiniZ Light Set

Super bright light set for mini-z with smallest size
Easy to install
Two wires connection only (connect to either motor port or battery directy
Low Current consumption
LED Brightness as high as 3200 mcd
Features:
Continuous Forward -> Front blue light on
Instance brake -> Rear red light from bright to dim
Continuous Backward -> Front/Rear red light on
An awsome parts for Mini-z!!!!
Xtra Speed (#XS4-1) Midnight Driver

For all mini-z racers, overlands, autoscales, Scaled Model and Die-Cast !!!
Installation:
Wire color: head light white/black wire, tail/brake light red/black wire, fog light yellow/black, pilot light blue/black
Connector connection:
1. Insert the red wired copper foil into the gap between the positive battery contact and the plastic, then bend foil towards another size of the plastic.
2. Insert the black wired copper foil into the gap between the negative battery contact and the plastic, then bend foil towards another size of the plastic.
3. Connect the blue wire to the red wire (positive) position of the motor output.
4. Connect the orange wire to the black wire (negative) position of the motor output.
Control Instructions:
1. When battery is installed, power on self-test starts, all LED light flashes three times, then turns off.
2. To turn on the light at static state lightly press the trigger of your remote control. If there is no further trigger, the lights will turn off after 10 seconds.
3. To turn on the light while driving just keep driving as usual, the lights keeps on as long as the car is running. If the car has stopped for 10s, all lights turn off automatically.
4. Brake light function the tail light turns brighter as brake light when you release the trigger to OFF position during driving. When the brake lights is on and you press the trigger key, the brake light turns to the tail light intensity level. The brake light effect works on both forward and backward driving.
5. Pilot light control as long as you are driving, the pilot light flashes rapidly. When you stop the car, the pilot flashes slowly. 10 seconds later, all lights turn off.
Tamiya (#50320) R/C Light Bulb Set

This is a light bulb set for electric powered R/C cars, which can be easily connected to a BEC system speed controller using plugs provided. Voltage: DC7.2V
Where to buy??

http://www.rcMart.com
rcMart has a variety of Mini-Z racers & hop ups at very attractive prices.

http://www.yeahracing.com
YeahRacing is a manufacturer for RC parts, hopups and accessories. They have a wide range for RC bearings under their own brands.
|